Réparez vos affaires Communauté Boutique

Canon Powershot SX500 IS Control Dial Replacement

Introduction

User needs PH00 screwdriver, spudger, and plastic pry tool.

Ce dont vous avez besoin

  1. Canon Powershot SX500 IS Control Dial Replacement, Battery: étape 1, image 1 de 1

    • Rotate the camera to expose the underside of the camera.

    Modifier

  2. Canon Powershot SX500 IS Control Dial Replacement: étape 2, image 1 de 1

    • Slide the rounded rectangle tab to the left to release the battery cover.

    Modifier

  3. Canon Powershot SX500 IS Control Dial Replacement: étape 3, image 1 de 1

    • Push the small orange tab forward to release the battery (Battery is ready for removal).

    Modifier

  4. Canon Powershot SX500 IS Control Dial Replacement, Back Cover: étape 4, image 1 de 3 Canon Powershot SX500 IS Control Dial Replacement, Back Cover: étape 4, image 2 de 3 Canon Powershot SX500 IS Control Dial Replacement, Back Cover: étape 4, image 3 de 3

    • Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.

    Modifier

  6. Canon Powershot SX500 IS Control Dial Replacement: étape 5, image 1 de 1

    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

    Modifier

  7. Canon Powershot SX500 IS Control Dial Replacement: étape 6, image 1 de 1

    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

    Modifier

  8. Canon Powershot SX500 IS Control Dial Replacement: étape 7, image 1 de 1

    • Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.

    Modifier

  9. Canon Powershot SX500 IS Control Dial Replacement: étape 8, image 1 de 2 Canon Powershot SX500 IS Control Dial Replacement: étape 8, image 2 de 2

    • Using the plastic pry tool, remove the back cover from camera.

    Modifier

  10. Canon Powershot SX500 IS Control Dial Replacement, Control Dial: étape 9, image 1 de 1

    • Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.

    Modifier

  11. Canon Powershot SX500 IS Control Dial Replacement: étape 10, image 1 de 1

    • Using the Phiillips 00 screwdriver, remove the 4mm screw to the right of the control dial.

    Modifier

  12. Canon Powershot SX500 IS Control Dial Replacement: étape 11, image 1 de 1

    • Using the spudger, lift the control dial to the right of the LCD screen.

    Modifier

  13. Canon Powershot SX500 IS Control Dial Replacement: étape 12, image 1 de 1

    • Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Shelby Spiering

Membre depuis le 04/07/15

252 Réputation

1 tutoriel rédigé

Badges: 11

+ 8 badges supplémentaires

Équipe

Eastern Washington University, Team 1-4, Plummer Spring 2015 Membre de l'équipe Eastern Washington University, Team 1-4, Plummer Spring 2015

EWU-PLUMMER-S15S1G4

4 membres

6 tutoriels rédigés

Un commentaire

Gracias gracias gracias

edgarlugo20111917 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 9

Total : 448