Réparez vos affaires Communauté Boutique

Canon Selphy CP1200 Print Mechanism Replacement

Introduction

This guide shows how to replace the printing mechanism for the Canon Selphy CP1200. This replacement may be necessary if the printing mechanism is faulty or is printing poor quality pictures while other device components are working and troubleshooting has failed. It is also a preliminary step for replacing both the battery leads and cooling fan.

Ce dont vous avez besoin

  1. Canon Selphy CP1200 Print Mechanism Replacement, LCD/Buttons: étape 1, image 1 de 1

    • Unscrew the four 6mm PH000 corner screws.

    • This will require a screwdriver with a long, narrow shaft.

    Modifier

  2. Canon Selphy CP1200 Print Mechanism Replacement: étape 2, image 1 de 1

    • Unscrew the three 4mm PH1 screws on the bottom of the printer.

    Modifier

  3. Canon Selphy CP1200 Print Mechanism Replacement: étape 3, image 1 de 1

    • Gently pry open the top of the case from either the front or back.

    • A plastic opening tool may help.

    • Be careful in lifting the top assembly as it is attached to the motherboard at this point.

    Modifier

  4. Canon Selphy CP1200 Print Mechanism Replacement: étape 4, image 1 de 1

    • Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.

    • Tweezers may be useful given the limited space between the top assembly and motherboard.

    • The top assembly, containing both the LCD and buttons, will now be completely free

    Modifier

  6. Canon Selphy CP1200 Print Mechanism Replacement, Motherboard: étape 5, image 1 de 1

    • Detach the fan cable from the motherboard.

    Modifier

  7. Canon Selphy CP1200 Print Mechanism Replacement: étape 6, image 1 de 1

    • Detach the ribbon cable leading to the DC in port and battery leads.

    • Tweezers may be useful.

    Modifier

  8. Canon Selphy CP1200 Print Mechanism Replacement: étape 7, image 1 de 1

    • Unscrew the three 3mm PH000 screws from the motherboard.

    Modifier

  9. Canon Selphy CP1200 Print Mechanism Replacement: étape 8, image 1 de 1

    • Disconnect the bundled cables leading to the printing mechanism.

    Modifier

  10. Canon Selphy CP1200 Print Mechanism Replacement: étape 9, image 1 de 1

    • Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.

    • Tweezers may be useful due to the limited amount of space.

    Modifier

  11. Canon Selphy CP1200 Print Mechanism Replacement, Print Mechanism: étape 10, image 1 de 2 Canon Selphy CP1200 Print Mechanism Replacement, Print Mechanism: étape 10, image 2 de 2

    • Open the side door and depress the ink cassette release.

    • Slide out and remove the ink cassette.

    Modifier

  12. Canon Selphy CP1200 Print Mechanism Replacement: étape 11, image 1 de 1

    • Unscrew the three 3mm PH000 screws securing the metal plate to the printing mechanism.

    Modifier

  13. Canon Selphy CP1200 Print Mechanism Replacement: étape 12, image 1 de 1

    • Lift out the print mechanism of the printer case.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

W Sherer

Membre depuis le 01/16/19

635 Réputation

5 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Eastern Washington University, Team S1-G3, Crawford Winter 2019 Membre de l'équipe Eastern Washington University, Team S1-G3, Crawford Winter 2019

EWU-CRAWFORD-W19S1G3

3 membres

10 tutoriels rédigés

Un commentaire

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 49

Total : 2,240