Réparez vos affaires Communauté Boutique

Canon Selphy CP910 LCD Screen Replacement

Introduction

The Canon Selphy CP910 is used to print pictures from a camera and WiFi connection. If there are any issues with the LCD screen of the printer, it may be necessary to remove it. For information regarding troubleshooting issues with the Canon Selphy CP910, go to Canon Selphy CP910 Troubleshooting.

Contact the manufacturer for inquiries about receiving parts of the Canon Selphy CP910.

Ce dont vous avez besoin

  1. Canon Selphy CP910 LCD Screen Replacement, Disassembling Canon Selphy CP910 Body: étape 1, image 1 de 2 Canon Selphy CP910 LCD Screen Replacement, Disassembling Canon Selphy CP910 Body: étape 1, image 2 de 2

    • Turn the printer over.

    • Use the PH1 screw bit to remove the three 8 mm screws in the middle of the back plate.

    • Keep track of these screws because you will need them to reassemble the printer.

    Modifier

  2. Canon Selphy CP910 LCD Screen Replacement: étape 2, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 2, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 2, image 3 de 3

    • Loosen up the four 10 mm corner screws.

    • A screwdriver with a long shaft approximately 7mm in diameter will make it easier to reach these screws.

    Modifier

  3. Canon Selphy CP910 LCD Screen Replacement: étape 3, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 3, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 3, image 3 de 3

    • Turn the device around and remove the "open" lid.

    • This lid needs to be removed in order to take the printer apart.

    • Gently bend the lid and remove it from its hinges.

    Modifier

  5. Canon Selphy CP910 LCD Screen Replacement: étape 4, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 4, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 4, image 3 de 3

    • Turn the device back over and lift the top panel up.

    • Disconnect the ribbon cables leading to the LCD screen.

    • Pull the top panel off.

    Modifier

  6. Canon Selphy CP910 LCD Screen Replacement, LCD Screen: étape 5, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement, LCD Screen: étape 5, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement, LCD Screen: étape 5, image 3 de 3

    • Once you detach the top, turn the device around.

    • Use the PH0 screw bit to remove the five [size] screws.

    Modifier

  7. Canon Selphy CP910 LCD Screen Replacement: étape 6, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 6, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 6, image 3 de 3

    • Push out the LCD screen from the main case.

    • The screen should slide out freely.

    Modifier

  8. Canon Selphy CP910 LCD Screen Replacement: étape 7, image 1 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 7, image 2 de 3 Canon Selphy CP910 LCD Screen Replacement: étape 7, image 3 de 3

    • Pull out the rod connecting the LCD screen to the frame.

    • Insert the new screen.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Christie Peralta

Membre depuis le 02/01/16

700 Réputation

5 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

UW Tacoma, Team 1-6, Rose Winter 2016 Membre de l'équipe UW Tacoma, Team 1-6, Rose Winter 2016

UWT-ROSE-W16S1G6

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 9

Total : 1,168