Aller au contenu principal

Canon Selphy CP910 Printer Body Replacement

Ce dont vous avez besoin

  1. Canon Selphy CP910 Printer Body Replacement, Disassembling Canon Selphy CP910 Body: étape 1, image 1 de 2 Canon Selphy CP910 Printer Body Replacement, Disassembling Canon Selphy CP910 Body: étape 1, image 2 de 2
    • Turn the printer over.

    • Use the PH1 screw bit to remove the three 8 mm screws in the middle of the back plate.

    • Keep track of these screws because you will need them to reassemble the printer.

  2. Canon Selphy CP910 Printer Body Replacement: étape 2, image 1 de 3 Canon Selphy CP910 Printer Body Replacement: étape 2, image 2 de 3 Canon Selphy CP910 Printer Body Replacement: étape 2, image 3 de 3
    • Loosen up the four 10 mm corner screws.

    • A screwdriver with a long shaft approximately 7mm in diameter will make it easier to reach these screws.

  3. Canon Selphy CP910 Printer Body Replacement: étape 3, image 1 de 3 Canon Selphy CP910 Printer Body Replacement: étape 3, image 2 de 3 Canon Selphy CP910 Printer Body Replacement: étape 3, image 3 de 3
    • Turn the device around and remove the "open" lid.

    • This lid needs to be removed in order to take the printer apart.

    • Gently bend the lid and remove it from its hinges.

  4. Canon Selphy CP910 Printer Body Replacement: étape 4, image 1 de 3 Canon Selphy CP910 Printer Body Replacement: étape 4, image 2 de 3 Canon Selphy CP910 Printer Body Replacement: étape 4, image 3 de 3
    • Turn the device back over and lift the top panel up.

    • Disconnect the ribbon cables leading to the LCD screen.

    • Pull the top panel off.

  5. Canon Selphy CP910 Printer Body Replacement, Printer Body: étape 5, image 1 de 2 Canon Selphy CP910 Printer Body Replacement, Printer Body: étape 5, image 2 de 2
    • Use the PH1 screw driver to remove the three screws on the motherboard.

  6. Canon Selphy CP910 Printer Body Replacement: étape 6, image 1 de 2 Canon Selphy CP910 Printer Body Replacement: étape 6, image 2 de 2
    • Remove the printer.

    • This will prevent the printer from falling out during repair.

  7. Canon Selphy CP910 Printer Body Replacement: étape 7, image 1 de 3 Canon Selphy CP910 Printer Body Replacement: étape 7, image 2 de 3 Canon Selphy CP910 Printer Body Replacement: étape 7, image 3 de 3
    • Remove the output connections.

    • Be careful! Do not pull too hard because the wires might rip.

    • Output connections are located on the corners of the motherboard.

  8. Canon Selphy CP910 Printer Body Replacement: étape 8, image 1 de 2 Canon Selphy CP910 Printer Body Replacement: étape 8, image 2 de 2
    • The motherboard is attached to three more ribbon wires.

    • Detach these wires.

    • Be careful not to pull too hard.

  9. Canon Selphy CP910 Printer Body Replacement: étape 9, image 1 de 2 Canon Selphy CP910 Printer Body Replacement: étape 9, image 2 de 2
    • Separate the motherboard from the main hard drive.

  10. Canon Selphy CP910 Printer Body Replacement: étape 10, image 1 de 3 Canon Selphy CP910 Printer Body Replacement: étape 10, image 2 de 3 Canon Selphy CP910 Printer Body Replacement: étape 10, image 3 de 3
    • Remove the main hard drive from the printer body.

  11. Canon Selphy CP910 Printer Body Replacement: étape 11, image 1 de 2 Canon Selphy CP910 Printer Body Replacement: étape 11, image 2 de 2
    • Gently remove the fan from the body.

    • The fan is glued to the case. When you install it in the new body, use hot glue to secure it in place.

  12. Canon Selphy CP910 Printer Body Replacement: étape 12, image 1 de 2 Canon Selphy CP910 Printer Body Replacement: étape 12, image 2 de 2
    • The empty case will look like this once all the parts are removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Christie Peralta

Membre depuis le 02/01/16

700 Réputation

5 tutoriels rédigés

Équipe

UW Tacoma, Team 1-6, Rose Winter 2016 Membre de l'équipe UW Tacoma, Team 1-6, Rose Winter 2016

UWT-ROSE-W16S1G6

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 12

30 derniers jours : 43

Total : 4,183