Introduction
If your lid has become warped over time, use this guide to replace it.
Ce dont vous avez besoin
-
-
Lift the lid of the Perfectea
-
Remove the two 12mm Phillips #2 screws located at the brim of the pot.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Un commentaire
This guide applies to the Capresso H2O kettle too. Thanks for the guide.