Réparez vos affaires Communauté Boutique

Carrera Mario Copter Controller Circuit Board Replacement

Introduction

The controller might stopped working due a malfunction error on the circuit board that you might want to consider replacing. This guide requires soldering. For more information on how to solder and desolder connections, please visit this guide.

Ce dont vous avez besoin

  1. Carrera Mario Copter Controller Circuit Board Replacement, Controller Circuit Board: étape 1, image 1 de 1

    • Flip the controller over so the underside would face up

    • Remove four of 7.1mm screws with a JIS #1 screwdriver

    • Remove two 4.0mm screws located on the handle with the JIS #1screwdriver.

    • Remove two 7.1 mm screws on the small area that stick out from the surface with the JIS #1 screwdriver

    • Use an extension with the JIS #1 screwdriver in order to get to the screws with yellow marks because they locate deep inside the holes.

    Modifier

  3. Carrera Mario Copter Controller Circuit Board Replacement: étape 2, image 1 de 1

    • Remove the black case to access the circuit board.

    • Remove two 4.8mm screws on the circuit board with the JIS #1 screwdriver.

    Modifier

  4. Carrera Mario Copter Controller Circuit Board Replacement: étape 3, image 1 de 1

    • Gently lift up the circuit board from the black case.

    • Use a soldering iron to melt the red wire while at the same time pulling it from the motherboard.

    • For more information on how to solder and desolder connections, please visit this guide.

    • Repeat the previous procedure with the black wire.

    • Gently remove the circuit board away from the case.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Edgar Lopez-Allende

Membre depuis le 10/20/17

207 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

UW Tacoma, Team S1-G6, Rose Fall 2017 Membre de l'équipe UW Tacoma, Team S1-G6, Rose Fall 2017

UWT-ROSE-F17S1G6

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 7

Total : 261