1. Flip the device over to the back side.
    • Flip the device over to the back side.

    Ajouter un commentaire

  2. Slide the small switch on the back to "MAIN".
    • Slide the small switch on the back to "MAIN".

    Ajouter un commentaire

    • Slide the battery cover downwards.

    • Pull off the battery cover.

    Ajouter un commentaire

    • Pull the black tab to remove the battery.

    Ajouter un commentaire

    • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

    Ajouter un commentaire

    • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

    Ajouter un commentaire

    • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

    Ajouter un commentaire

    • Pry the two halves of the case apart with the small flat head screwdriver.

    Ajouter un commentaire

    • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

    • Lay the two halves of the outer case next to the central components as shown.

    Ajouter un commentaire

    • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

    Ajouter un commentaire

    • Lift the tab on the motherboard and pull out the ribbon cable.

    • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

    Ajouter un commentaire

    • Using the #00 Phillips screwdriver, remove the screws on the back of the front case. There are five total.

    Ajouter un commentaire

    • Pull the ribbon cable out of its port on the back of the keypad.

    Ajouter un commentaire

    • The keypad can now be lifted off the front case.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

Membre depuis le 03/04/2012

47 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 5-4, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 5-4, Forte Spring 2012

CPSU-FORTE-S12S5G4

6 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 414