Introduction

This guide will show you how to remove the LCD screen off the Casio Camera.

Remove the side two screws on the side with the speaker, on the portion of the camera that is part of the back casing.
  • Remove the side two screws on the side with the speaker, on the portion of the camera that is part of the back casing.

  • Label screws (where they came from and what step) and set aside in sorting tray.

Ajouter un commentaire

Remove the two back screws on the bottom of the camera, on the same side as the LCD screen.
  • Remove the two back screws on the bottom of the camera, on the same side as the LCD screen.

  • Note: Bottom screws are longer than the top ones, so label accordingly for ease in reassembly. (See attached picture.)

Ajouter un commentaire

  • Remove screws on the side opposite of the speaker.

  • Label accordingly and add to sorting tray.

Ajouter un commentaire

  • Once all screws have been removed, gently pry open bottom casing.

  • With tweezers, carefully remove ribbon from LCD screen- NOT from the back casing itself.

  • Set bottom casing aside.

  • Navigation button may fall out. Be cautious of this and set aside if needed.

Ajouter un commentaire

  • Use tweezers or prongs to pry LCD screen off from openings.

  • There is a ribbon attached to the screen. Be sure not to pull this ribbon off the screen.

Ajouter un commentaire

  • Lift up LCD screen.

  • Slowly move it to the other side.

  • Be sure to be very gentle with the LCD screen.

Ajouter un commentaire

  • Under the LCD screen you will see an LCD casing. You will want to GENTLY pry this off using tweezers.

  • The casing may possibly be attached to LCD screen. If so, leave attached to screen.

Ajouter un commentaire

  • Flip open the connector holding the ribbon.

  • Pull out the LCD screen with the ribbon from the camera.

  • THIS STEP IS ONE WHERE YOU SHOULD USE CAUTION AND BE VERY GENTLE!

Ajouter un commentaire

  • Your LCD screen is now detached.

  • Locate your replacement screen that you will now attach.

Ajouter un commentaire

  • Reconnect LCD ribbon to connector and flip back down.

  • Ribbon should be inserted straight in and to the right side.

Ajouter un commentaire

  • Reattach LCD casing.

  • Flip back over into place.

Ajouter un commentaire

  • Make sure LCD screen is firmly connected to camera.

  • You may hear a click.

Ajouter un commentaire

  • Reattach the back casing as well as the small ribbon with it to the camera body.

  • Be careful reattaching the case. Using tweezers might help.

Ajouter un commentaire

  • Locate labeled screws from Step 2-bottom of the camera.

  • These are the longer screws. Screw them back in.

  • The picture shown does not show the right screw removed and ready to be replaced due to an issue with this specific camera.

Ajouter un commentaire

  • Locate labeled screws from Step 1 and Step 3-side of the camera.

  • These are the shorter screws. Screw them back in.

  • Congratulations! Your camera has been reassembled.

Ajouter un commentaire

Conclusion

By now you should have been able to get your Casio Exilim EX-Z850 camera's LCD screen functioning.

Une autre personne a terminé cette réparation.

Christian

Membre depuis le 28/01/2011

320 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 4-38, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 4-38, Regan Winter 2011

CPSU-REGAN-W11S4G38

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 7

Total : 2,152