Introduction

In this guide, we will be completely disassembling the phone down to the core to remove the camera and replacing it with a new one.

  1. Slide the slider on the back of the phone to the free position.
    • Slide the slider on the back of the phone to the free position.

  2. Using a plastic opening tool, gently lift open the back panel from bottom of the panel.
    • Using a plastic opening tool, gently lift open the back panel from bottom of the panel.

    • Pull the white battery tab upwards and remove the battery.

    • Remove the four 6mm Y0 screws from the corners of the device.

    • Remove the four 5mm Y0 screws from the back of the device.

    • Using a spudger, pry away the motherboard from its compartment, by inserting the spudger in the compartment and lifting upwards until fully out.

    • Lastly, using your hands, separate the motherboard from its compartment.

    • Using a spudger, gently lift up the orange connector.

    • Flip over the motherboard

    • Using a spudger, lift up the small black connector and remove the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zack Almeida

Membre depuis le 24/10/2018

362 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team S3-G7, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S3-G7, Peak Fall 2018

UMASSD-PEAK-F18S3G7

3 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 35

Total : 59