Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
This super strong Casio watch is more docile than waht you might think.
-
We don't need to twist off the front's screws.
-
It doesn't bite, so let's turn it around
-
-
Cette étape n’est pas traduite. Aidez à la traduire
Outil utilisé dans cette étape :Tweezers$4.99-
With the phillips screwdriver take off these four screws
-
Lift up an extremity of the watchstrap and remove the base.
-
You can use a flat screwdriver to help you
-
With the tweezers lift the white plastic cover
-
Be careful to not damage the golden springs!! So take your time
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the tip of the tweezers you have to unclip the clips into the red rectangles.
-
Just insert the tweezer's tip in the center of the bracket and pull toward the center of the watch
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Extract the battery leveraging with the tweezers.
-
Keep attention to the golden springs again!
-
The clip, holding down the central batteries, completely removes
-
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.
3 commentaires
cannot see the “Golden Springs”. Where are they? Thank you
would be nice to have a description if the battery type, to buy before disassembling.. Thank you
mike
Sorry if I wasn’t imprecise, the “Golden Springs” is located above the first battery on the left. More precisely in second step of the guide I marked it.
Coin shaped Batteries are Sony SR927W:
* 1.55 Volt
* 60 mAh
Acn0w -