Introduction
Replacing the internal frame on this device is very simple and requires minimal disassembly.
Pièces
Aucune pièce nécessaire.
-
Lay the device on its back, and rotate so the base is facing away from you.
-
Grip the frame with your fingers under the edge of the frame, and thumbs pushing down on the front of the device.
-
Lift up the frame with your fingers and push down the rest of the device with your thumbs.
-
Remove the frame and matte from the device.
-
Remove the four 7mm Torx T6 screws.
-
Using the plastic opening tool or your fingers, lift up the frame from any edge.
-
Remove the frame from the device.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce guide.
Une autre personne a terminé cette réparation.
Équipe
Cal Poly, Team 9-25, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 9-25, Maness Winter 2014
CPSU-MANESS-W14S9G25
4 membres
5 tutoriels rédigés
