Aller au contenu principal

Introduction

If a Google Chromecast is dropped, there is a chance the case will lose integrity and crack or become deformed. When removing the case, the power button can become dislodged. Be sure to not lose this piece.

Outils

Pièces

Aucune pièce spécifiée.

  1. Chromecast Case Replacement, Case: étape 1, image 1 de 1
    • Place the Google Chromecast face down (with text not showing) on a flat surface.

    • Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.

  2. Chromecast Case Replacement: étape 2, image 1 de 1
    • Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.

  3. Chromecast Case Replacement: étape 3, image 1 de 1
    • Remove the circuit board, lifting from the HDMI port.

    • The power button may become dislodged.

  4. Chromecast Case Replacement: étape 4, image 1 de 1
    • Pry the plastic clamp from the heatsink.

    • Do not pry too hard to avoid breaking the clamp.

  5. Chromecast Case Replacement: étape 5, image 1 de 2 Chromecast Case Replacement: étape 5, image 2 de 2
    • Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.

    • The adhesive's strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Cameron Heiges

Membre depuis le 21/03/2018

629 Réputation

3 tutoriels rédigés

Équipe

IUPUI, Team S5-G6, Baechle Spring 2018 Membre de l'équipe IUPUI, Team S5-G6, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G6

3 membres

3 tutoriels rédigés

Un commentaire

que hacer si el pin de centro de carga se despredio como pegarlo o soldarlo?

edgar arreola - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 16

Total : 1,251