Aller au contenu principal

Introduction

A guide to show how to replace Chumby One motherboard.

  1. Remove 4 self-adhesive plastic dots covering the screw holes.
    • Remove 4 self-adhesive plastic dots covering the screw holes.

  2. Remove the four 2mm screws with a Phillips screwdriver.
    • Remove the four 2mm screws with a Phillips screwdriver.

  3. Remove the back and bottom cover.
    • Remove the back and bottom cover.

  4. Disconnect the battery connector from the motherboard with a plastic opening tool.
    • Disconnect the battery connector from the motherboard with a plastic opening tool.

  5. Disconnect the microphone connector from the motherboard with a plastic opening tool.
    • Disconnect the microphone connector from the motherboard with a plastic opening tool.

  6. Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant

    Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant
  7. Remove the display ribbon cable from its socket with a plastic opening tool.
    • Remove the display ribbon cable from its socket with a plastic opening tool.

  8. Remove the volume knob from the side of the Chumby One with a plastic opening tool.
    • Remove the volume knob from the side of the Chumby One with a plastic opening tool.

  9. Remove the four 6mm screws using a PH000 bit on the inner chassis.
    • Remove the four 6mm screws using a PH000 bit on the inner chassis.

  10. Remove the inner components from the outer shell.
    • Remove the inner components from the outer shell.

  11. Remove the speaker connector using a plastic spudger.
    • Remove the speaker connector using a plastic spudger.

  12. Remove the Chumby button connector using a plastic spudger.
    • Remove the Chumby button connector using a plastic spudger.

  13. Remove three 6mm screws using a PH000 bit.
    • Remove three 6mm screws using a PH000 bit.

  14. Remove the motherboard by pulling straight away from the housing.
    • Remove the motherboard by pulling straight away from the housing.

    • Removing the motherboard there are 2 pins and socket connectors that may cause injury.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jordan Houchins

Membre depuis le 27/03/2017

401 Réputation

4 tutoriels rédigés

Équipe

IUPUI, Team S3-G3, Baechle Spring 2017 Membre de l'équipe IUPUI, Team S3-G3, Baechle Spring 2017

IUPUI-BAECHLE-S17S3G3

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 138