Aller au contenu principal

Circuit Board

Ce dont vous avez besoin

  1. Circuit Board, Battery: étape 1, image 1 de 2 Circuit Board, Battery: étape 1, image 2 de 2
    • Locate the horizontal grip located on the back cover of the phone.

    • Slide the back cover down and off of the phone.

  2. Circuit Board: étape 2, image 1 de 2 Circuit Board: étape 2, image 2 de 2
    • Insert a plastic opening tool into the battery release point located above the battery.

    • Pull outwards in order to release the battery.

  3. Circuit Board, Circuit Board Housing: étape 3, image 1 de 3 Circuit Board, Circuit Board Housing: étape 3, image 2 de 3 Circuit Board, Circuit Board Housing: étape 3, image 3 de 3
    • Locate the 5 screws holding the body of the phone together.

    • The top screw will have a plastic cover, remove it using tweezers.

    • Using a Philips head screwdriver, twist counterclockwise to remove the screws.

    • Take special care with the screw located at the top of the phone. It is smaller and more likely to be damaged or improperly attached.

  4. Circuit Board: étape 4, image 1 de 2 Circuit Board: étape 4, image 2 de 2
    • Lift the back cover starting at the bottom of the phone.

  5. Circuit Board: étape 5, image 1 de 2 Circuit Board: étape 5, image 2 de 2
    • Remove the back cover completely from the phone.

  6. Circuit Board, Circuit Board: étape 6, image 1 de 1
    • Locate the clamp at bottom right side of the Circuit Board.

    • Pull the circuit board from the phone being cautious to pull out underneath the clamp.

  7. Circuit Board: étape 7, image 1 de 2 Circuit Board: étape 7, image 2 de 2
    • Locate the ribbon connecting the circuit board to the phone display.

    • Using the spudger, disconnect the ribbon connecting the phone's display and the circuit board.

    • Remove the circuit board

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathan Flowers

Membre depuis le 10/18/13

607 Réputation

6 tutoriels rédigés

Équipe

Clemson, Team 14-7, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-7, Benson Fall 2013

CLEM-BENSON-F13S14G7

3 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 495