Aller au contenu principal

Cisco 878 Integrated Services Router Top Cover Disassembly

Ce dont vous avez besoin

  1. Cisco 878 Integrated Services Router Top Cover Disassembly, Remove the two screws on back side: étape 1, image 1 de 3 Cisco 878 Integrated Services Router Top Cover Disassembly, Remove the two screws on back side: étape 1, image 2 de 3 Cisco 878 Integrated Services Router Top Cover Disassembly, Remove the two screws on back side: étape 1, image 3 de 3
    • Only trained and qualified personnel should be allowed to install, replace, or service this equipment!

    • During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself!

    • Make sure that the power switch is turned to standby and that the power supply cable is disconnected. Disconnect all cables from the router back panel.

    • Use the Phillips #1 Screwdriver to remove the two screws on back side of the device.

  2. Cisco 878 Integrated Services Router Top Cover Disassembly, Remove top cover: étape 2, image 1 de 3 Cisco 878 Integrated Services Router Top Cover Disassembly, Remove top cover: étape 2, image 2 de 3 Cisco 878 Integrated Services Router Top Cover Disassembly, Remove top cover: étape 2, image 3 de 3
    • 1. Gently push the top cover of the router away from you.

    • 2. Lift it up top cover from the bottom of the router.

    • 3. Remove top cover from the device.

    • Place the router bottom on an antistatic mat.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jiri Altman

Membre depuis le 05/03/16

1 515 Réputation

9 tutoriels rédigés

Équipe

4k20 Repair Team Membre de l'équipe 4k20 Repair Team

Community

2 membres

17 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 237