Clarinet Cork Replacement

Introduction

Taking your clarinet to the music store to get your cork replace can be expensive. Following this guide by removing and replacing the cork yourself can save you a lot of money.

Ce dont vous avez besoin

Étape 1 Cork

Clarinet Cork Replacement, Cork: étape 1, image 1 de 1

Using pliers, remove the old cork by pinching it off.

Modifier

Étape 2

Clean the joint with soap and water

Modifier

Étape 3

Measure the width of the tenon joint.
Only measure the area where the cork will lie, not the entire joint.

Modifier

Étape 4

Cut the new cork to match the width of the tenon joint.

Modifier

Étape 5

Peel off the backside of the cork to reveal the adhesive.

Modifier

Étape 7

Sand the cork with sandpaper until the cork is smooth.

Modifier

Étape 8

Apply cork grease on the new cork.

Modifier

Étape 9

Slowly twist and slide the joint back together.

Modifier

Conclusion

Once your clarinet is reassembled, leave the joint together for at least a few hours to let the cork compress and adhere properly. Play the fully assembled clarinet or blow some air through the joint to check for any leaks. When you are ready to put it away, disassemble it carefully. Enjoy your new cork!

7 autres ont terminé cette réparation.