Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This outer cover is the main cover that protects the inner electrical components. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device.
Ce dont vous avez besoin
-
-
Unscrew the securing cap counterclockwise from the antenna connector.
-
-
-
-
Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.
-
-
-
Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.