Réparez vos affaires Communauté Boutique

ColecoVision Power Switch Replacement

Introduction

The purpose of this guide is to communicate steps on how to replace or repair the power switch on a ColecoVision.

Ce dont vous avez besoin

  1. ColecoVision Power Switch Replacement, Power Switch: étape 1, image 1 de 1

    • Flip the ColecoVision over with the pegs facing the ceiling.

    • Remove the eight 15mm screws holding the bottom of the ColecoVision in place using the Phillips #1 screwdriver.

    Modifier

  2. ColecoVision Power Switch Replacement: étape 2, image 1 de 2 ColecoVision Power Switch Replacement: étape 2, image 2 de 2

    • Carefully remove the bottom of the ColecoVision out of the top.

    • I would recommend running a metal spudger along the rim of the case to remove the bottom.

    Modifier

  4. ColecoVision Power Switch Replacement: étape 3, image 1 de 1

    • Remove the two 15 mm screws holding the casing in place using the Phillips #1 screwdriver.

    Modifier

  5. ColecoVision Power Switch Replacement: étape 4, image 1 de 2 ColecoVision Power Switch Replacement: étape 4, image 2 de 2

    • Using a Phillips #1 screwdriver, remove the two 15mm screws on the motherboard.

    • Pull the entire motherboard towards the back of the system and carefully lift the entire motherboard.

    Modifier

  6. ColecoVision Power Switch Replacement: étape 5, image 1 de 1

    • Flip the motherboard over.

    • Using a soldering iron, carefully desolder the power switch from the motherboard.

    • Refer to this soldering technique guide for reference.

    Modifier

  7. ColecoVision Power Switch Replacement: étape 6, image 1 de 1

    • Wait for power switch to cool down.

    • Turn the motherboard over upright.

    • Carefully lift up the power switch to completely remove it from the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Bobby

Membre depuis le 10/17/18

380 Réputation

2 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

UW Tacoma, Team S1-G2, Rose Fall 2018 Membre de l'équipe UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 12

30 derniers jours : 35

Total : 1,685