Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Learn how to properly replace the power cable of your Comfort Zone CZ6C.

  1. Make sure to unplug the Comfort Zone CZ6C before cutting any wires. Before attempting to replace your power cable, learn how to solder using the How To Solder and Desolder Corrections Guide. Start with the fan on its back. Unscrew the back panel to expose the internal wiring.
    • Make sure to unplug the Comfort Zone CZ6C before cutting any wires.

    • Before attempting to replace your power cable, learn how to solder using the How To Solder and Desolder Corrections Guide.

    • Start with the fan on its back. Unscrew the back panel to expose the internal wiring.

  2. Unscrew the yellow cap that connects the black wire and the gray power cord wire. Then, unwind the tied wires and pull them apart. Unscrew the yellow cap that connects the black wire and the gray power cord wire. Then, unwind the tied wires and pull them apart. Unscrew the yellow cap that connects the black wire and the gray power cord wire. Then, unwind the tied wires and pull them apart.
    • Unscrew the yellow cap that connects the black wire and the gray power cord wire. Then, unwind the tied wires and pull them apart.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. Remove the plastic cover on the switch by pulling it apart from the back panel. Remove the plastic cover on the switch by pulling it apart from the back panel.
    • Remove the plastic cover on the switch by pulling it apart from the back panel.

  5. Use the soldering iron with caution. Don't touch the tip of the soldering iron to avoid the risk of injury.
    • Use the soldering iron with caution. Don't touch the tip of the soldering iron to avoid the risk of injury.

    • This step can be made easier with the help of a partner to hold the wiring while you desolder the connection.

    • Disconnect the gray power wire from the switch by desoldering the connection.

  6. Strip the end of the gray power cord.
    • Strip the end of the gray power cord.

    • Then solder the end of the gray power cord to the switch.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nishanth Dara

Membre depuis le 08/04/2015

138 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 17-5, Forte Spring 2015 Membre de l'équipe Cal Poly, Team 17-5, Forte Spring 2015

CPSU-FORTE-S15S17G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 37

Total : 1,579