Introduction

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the floppy drive of the Compaq Evo N1000v device.

Pièces

Aucune pièce nécessaire.

Remove the 6 screws as shown in the photo.
  • Remove the 6 screws as shown in the photo.

Ajouter un commentaire

Push the front of the laptop upwards as the photo shows.
  • Push the front of the laptop upwards as the photo shows.

Ajouter un commentaire

  • Rest the front end piece on the keyboard area.

Ajouter un commentaire

  • Squeeze and pull up on the left and right sides of the floppy drive cable to unlock it.

Ajouter un commentaire

  • Use the tweezers is gently pull the cable from the locking mechanism.

Ajouter un commentaire

  • Unscrew the 4 screws as shown in the photo.

Ajouter un commentaire

  • Remove the floppy drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

ryan

Membre depuis le 12/03/2014

470 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 191