Introduction

How to remove the Compaq Evo 1000v keyboard.

Pièces

Aucune pièce nécessaire.

  1. Turn the laptop bottom side up with the rear panel facing forward.
    • Turn the laptop bottom side up with the rear panel facing forward.

    Ajouter un commentaire

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Ajouter un commentaire

    • Turn the laptop top side up with the front facing forward. Open the screen.

    Ajouter un commentaire

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Ajouter un commentaire

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Ajouter un commentaire

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

    Ajouter un commentaire

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Ajouter un commentaire

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Ajouter un commentaire

    • Lift the back edge of the keyboard and pull towards the screen.

    Ajouter un commentaire

    • Pull the cable and lift up to release.

    Ajouter un commentaire

    • Remove the keyboard.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

kim

Membre depuis le 14/04/2010

47 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 29-74, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 3,419