Introduction

A guide on how to remove the Palm Rest.

Turn the laptop bottom side up with the rear panel facing forward.
  • Turn the laptop bottom side up with the rear panel facing forward.

Ajouter un commentaire

Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
  • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

Ajouter un commentaire

  • Turn the laptop top side up with the front facing forward. Open the screen.

Ajouter un commentaire

  • Locate the F1 and F2 keys near the top left corner of the keyboard.

Ajouter un commentaire

  • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

Ajouter un commentaire

  • Locate the Pause and Scroll keys near the top right corner of the keyboard.

Ajouter un commentaire

  • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

Ajouter un commentaire

  • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

Ajouter un commentaire

  • Lift the back edge of the keyboard and pull towards the screen.

Ajouter un commentaire

  • Pull the cable and lift up to release.

Ajouter un commentaire

  • Remove the keyboard.

Ajouter un commentaire

  • Flip the computer bottom side up with the rear facing forward.

Ajouter un commentaire

  • Remove the six screws shown in picture.

Ajouter un commentaire

  • Remove battery and then remove screw in metal support on case edge

  • Flip the computer top side up with the front facing you.

Ajouter un commentaire

  • Lift up the palm rest from the front edge and swing it towards the screen.

Ajouter un commentaire

  • Locate the first connector. Disconnect by firmly pulling up.

Ajouter un commentaire

  • Locate the second connector. Remove by firmly pulling up.

Ajouter un commentaire

  • Remove the palm rest.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Alex Hernandez

Membre depuis le 14/04/2010

28 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 29-74, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 2,764