Menu 

Vos paramètres

Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils
Mon panier (US Store)

On dirait que votre panier est vide

Parcourez notre boutique

Compaq Evo N1000v Top Cover Replacement

Rédigé par : Alex Hernandez (et 3 autres contributeurs)
  • Commentaires : 0
  • Favoris : 0

Difficulté

Modérée

Étapes

27

Sections

5

Drapeaux

7

Missing Prerequisites

Conditions préalables manquantes

Ce tutoriel ne donne pas d'informations sur le début de la procédure. Créez un tutoriel de conditions préalables !

Confusing Text

Texte bizarre

Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifie-les pour les rendre plus claires !

Markup Mishap

Problème de balisage

Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.

Action Shots

Photos d’action

Montrez ce dont un héros est capable ! Ce tutoriel a besoin d'images pour mieux illustrer certaines opérations spécifiques.

Missed a Step

Une étape a été sautée

Oups ! Il manque encore des étapes importantes à ce tutoriel.

Inconsistent Images

Images incohérentes

Actualiser les images pour les adapter aux conditions préalables augmenterait la qualité de ce tutoriel.

Needs Better Images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Introduction

A guide on how to remove the Top Cover.

Outils

Acheter ces outils

Pièces

Aucune pièce nécessaire.

  1. Turn the laptop bottom side up with the rear panel facing forward.

    • Turn the laptop bottom side up with the rear panel facing forward.

    Traduire

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Traduire

  3. Turn the laptop top side up with the front facing forward. Open the screen.

    • Turn the laptop top side up with the front facing forward. Open the screen.

    Traduire

  4. Locate the F1 and F2 keys near the top left corner of the keyboard.

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Traduire

  5. While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Traduire

  6. Locate the Pause and Scroll keys near the top right corner of the keyboard.

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

    Traduire

  7. While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Traduire

  8. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Traduire

  9. Lift the back edge of the keyboard and pull towards the screen.

    • Lift the back edge of the keyboard and pull towards the screen.

    Traduire

  10. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique

  11. Pull the cable and lift up to release.

    • Pull the cable and lift up to release.

    Traduire

  12. Remove the keyboard.

    • Remove the keyboard.

    Traduire

  13. Locate the fan near the top left corner. It has three colored wires: yellow, red, and black.

    • Locate the fan near the top left corner. It has three colored wires: yellow, red, and black.

    • Disconnect the cable connecting the fan to the system board.

    Traduire

  14. Locate and remove the four screws in the copper plate.

    • Locate and remove the four screws in the copper plate.

    Traduire

  15. Remove the heat spreader by pulling the whole assembly up out of the computer.

    • Remove the heat spreader by pulling the whole assembly up out of the computer.

    Traduire

  16. Flip the computer bottom side up with the rear facing forward.

    • Flip the computer bottom side up with the rear facing forward.

    Traduire

  17. Remove the six screws shown in picture.

    • Remove the six screws shown in picture.

    Traduire

  18. Remove battery and then remove screw in metal support on case edge

    • Remove battery and then remove screw in metal support on case edge

    • Flip the computer top side up with the front facing you.

    Traduire

  19. Lift up the palm rest from the front edge and swing it towards the screen.

    • Lift up the palm rest from the front edge and swing it towards the screen.

    Traduire

  20. Locate the first connector. Disconnect by firmly pulling up.

    • Locate the first connector. Disconnect by firmly pulling up.

    Traduire

  21. Locate the second connector. Remove by firmly pulling up.

    • Locate the second connector. Remove by firmly pulling up.

    Traduire

  22. Remove the palm rest.

    • Remove the palm rest.

    Traduire

  23. Turn the base bottom side up.

    • Turn the base bottom side up.

    Traduire

  24. Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

    • Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

    Traduire

  25. Turn the base top side up with the front facing forward.

    • Turn the base top side up with the front facing forward.

    Traduire

  26. Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

    • Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

    Traduire

  27. Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Disconnect the microphone cable from the system board.

    Traduire

  28. Remove the top cover from the base.

    • Remove the top cover from the base.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Alex Hernandez

Membre depuis le 14/04/2010

43 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 29-74, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire
Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 2,895