Introduction

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the touchpad of the Compaq Evo N1000v device.

Pièces

Aucune pièce nécessaire.

Remove the 6 screws as shown in the photo.
  • Remove the 6 screws as shown in the photo.

Ajouter un commentaire

Push the front of the laptop upwards as the photo shows.
  • Push the front of the laptop upwards as the photo shows.

Ajouter un commentaire

  • Rest the front end piece on the keyboard area.

Ajouter un commentaire

  • Unscrew the 4 screws as shown in the photo.

Ajouter un commentaire

  • Unplug the cable as shown in the photo.

Ajouter un commentaire

  • Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.

Ajouter un commentaire

  • Unplug the cable you have just unlocked.

Ajouter un commentaire

  • Remove the gray, metal case surrounding the touchpad.

Ajouter un commentaire

  • Remove the touchpad.

  • Repeat these steps in reverse order to install the new touchpad.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

ryan

Membre depuis le 12/03/2014

470 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 192