Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide will show how to swap out the internal Hard Drive for either a HDD or for a SSD.

Pièces

Aucune pièce spécifiée.

  1. Turn the laptop off and disconnect all sources of power.
    • Turn the laptop off and disconnect all sources of power.

    • Set the laptop on a flat surface with the bottom side facing up.

  2. Slide the battery release tab. This will eject the battery. Carefully remove the battery and set it aside.
    • Slide the battery release tab.

    • This will eject the battery.

    • Carefully remove the battery and set it aside.

  3. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Use a PH1 screwdriver to unscrew the 2 screws that secure the hard drive cover. Remove the cover.
    • Use a PH1 screwdriver to unscrew the 2 screws that secure the hard drive cover.

    • Remove the cover.

  5. Unscrew the next three screws holding the hard drive in place. Pull the black ribbon and slide the hard drive out of place.
    • Unscrew the next three screws holding the hard drive in place.

    • Pull the black ribbon and slide the hard drive out of place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Garrett Carter

Membre depuis le 21/09/2018

471 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 17

Total : 254