Aller au contenu principal

Introduction

This is a motherboard replacement guide for the Compaq Presario CQ62. This guide gives step by step instructions on how to remove and replace your motherboard.

  1. Remove the two M2.5x5 screws securing the cover of the hard drive.
    • Remove the two M2.5x5 screws securing the cover of the hard drive.

  2. Remove harddrive by pushing  upwards on metal supports. When free, release harddrive connector.
    • Remove harddrive by pushing upwards on metal supports.

    • When free, release harddrive connector.

  3. unscrew two screws holding lid for WLAN & RAM remove screw holding WLAN module in place Release the two RF connectors on the WLAN module.
    • unscrew two screws holding lid for WLAN & RAM

    • remove screw holding WLAN module in place

    • Release the two RF connectors on the WLAN module.

  4. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant
  5. Lift up wlan module to 45 degrees, and pull it gently out.
    • Lift up wlan module to 45 degrees, and pull it gently out.

  6. Remove bottom screws.
    • Remove bottom screws.

    • The seven marked in red color is holding the keyboard.

  7. To remove keyboard, use spudger to release the snaps between casing and keyboard top. All the way around the product except LDC area. with a spudger or small flat screw driver firmly press the keybord from F-keys row downwards toward space key.
    • To remove keyboard, use spudger to release the snaps between casing and keyboard top. All the way around the product except LDC area.

    • with a spudger or small flat screw driver firmly press the keybord from F-keys row downwards toward space key.

  8. When pressing down on the keyboard the force must overcome the adhesive. When lifting out keyboard be mindfull on the keyboard flex, that need to be disconnected when keyboard is loose. remove the flex'es by opening the connectors and remove them (5 in total).
    • When pressing down on the keyboard the force must overcome the adhesive.

    • When lifting out keyboard be mindfull on the keyboard flex, that need to be disconnected when keyboard is loose.

    • remove the flex'es by opening the connectors and remove them (5 in total).

    • Remove 3 screws (marked Red)

    • Finally the top cover can be removed with a spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order. To dissasemble the logic board see the other ifixit guide for this laptop.

5 autre(s) ont terminé cette réparation.

Carsten Dahl Hjarup

Membre depuis le 04/11/2013

1 014 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 15

Total : 5,174