Introduction
You are going to be starting from the handle and working your way to the head of the dryer in this disassembly.
Ce dont vous avez besoin
-
-
Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
-
-
-
Remove the inner white disk piece by gently pulling it out with your finger nail.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.