Réparez vos affaires Communauté Boutique

Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement

Introduction

If you think that your hair dryer's fan motor is being clogged with loose hair, use this guide to remove the motor for cleaning.

Ce dont vous avez besoin

  1. Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement, Back Panel: étape 1, image 1 de 1

    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

    Modifier

  2. Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 2, image 1 de 2 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 2, image 2 de 2

    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

    Modifier

  4. Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 3, image 1 de 3 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 3, image 2 de 3 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 3, image 3 de 3

    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

    Modifier

  5. Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement, Fan Motor Assembly: étape 4, image 1 de 2 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement, Fan Motor Assembly: étape 4, image 2 de 2

    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

    Modifier

  6. Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 5, image 1 de 3 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 5, image 2 de 3 Conair Infiniti Pro Model 259NP Fan Motor Assembly Replacement: étape 5, image 3 de 3

    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Timothy Lo

Membre depuis le 04/22/14

1 172 Réputation

7 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

Cal Poly, Team 10-58, Amido Spring 2014 Membre de l'équipe Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 18

30 derniers jours : 59

Total : 7,137