Aller au contenu principal

Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement

Ce dont vous avez besoin

  1. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Back Panel: étape 1, image 1 de 1
    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

  2. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 2, image 1 de 2 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 2, image 2 de 2
    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

  3. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 3, image 1 de 3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 3, image 2 de 3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 3, image 3 de 3
    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

  4. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Fan Motor Assembly: étape 4, image 1 de 2 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Fan Motor Assembly: étape 4, image 2 de 2
    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

  5. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 5, image 1 de 3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 5, image 2 de 3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 5, image 3 de 3
    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

  6. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Hot/Cold Button: étape 6, image 1 de 1
    • Caution: Do not attempt to open or tamper with the capacitor. You may suffer severe electrical shocks.

    • Hold the electrical switches so that the wires are facing upwards.

  7. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: étape 7, image 1 de 1
    • Focus on the middle of the three buttons.

    • Desolder the button at the circled locations.

    • To reattach the new button, resolder at the same points. Be sure the wires connect to the correct locations.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Timothy Lo

Membre depuis le 04/22/14

1 172 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 10-58, Amido Spring 2014 Membre de l'équipe Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 membres

7 tutoriels rédigés

2 commentaires

so where do you buy parts???

akatser1 - Réponse

That's not a capacitor, that's an ion generator like this one https://www.goldmine-elec-products.com/p...

Shannon Carey - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 4,480