Réparez vos affaires Communauté Boutique

Conair Instant Heat Curling Wand CD778CS Power Cord Replacement

Introduction

This guide will walk the user through replacing the power cord in their Conair Curling Wand. The most common problem this device encounters is power cord failure which does not enable the wand to heat up. This guide is moderately easy and the most difficult part is opening up the device.

Ce dont vous avez besoin

  1. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement, Power Cord: étape 1, image 1 de 1

    • Remove 2 mm screw with a Phillips #0 screwdriver.

    • Make sure curling wand is unplugged and cooled before beginning.

    Traduire

  2. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 2, image 1 de 2 Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 2, image 2 de 2

    • Remove the next 4 mm screw with a Phillips #0 screwdriver.

    Traduire

  4. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 3, image 1 de 1

    • Use a flat head screwdriver to assist in prying open the plastic housing.

    Traduire

  5. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 4, image 1 de 1

    • Gently open the plastic housing making sure to evenly pull apart the plastic so it does not bend or snap.

    Traduire

  6. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 5, image 1 de 1

    • Remove the plastic ring on the bottom of the curling iron by wiggling back and forth and pulling down.

    • Use your flat head screwdriver for assistance if the plastic housing is firmly in place and does not move.

    Traduire

  7. Conair Instant Heat Curling Wand CD778CS Power Cord Replacement: étape 6, image 1 de 1

    • Locate the power cord and remove it by unplugging from the housing.

    • Plug the new cord into the same location.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Rebecca Grealy

Membre depuis le 09/25/18

135 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

Eastern Washington University, Team S3-G5, Crane Fall 2018 Membre de l'équipe Eastern Washington University, Team S3-G5, Crane Fall 2018

EWU-CRANE-F18S3G5

4 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 15

Total : 1,179