Introduction
Use this guide to replace a faulty or shattered light bulb in your Conair True Glow Lighted Mirror (model TGBE104XCLED).
The light bulb is a piece of hardware that is used to convert electricity into light, consisting of a source of illumination enclosed within a transparent or translucent shell, typically having a rounded shape. For this device, use an all-purpose fluorescent 8W (watt) LED light bulb.
If your bulb is shattered, make sure to wear proper clothing and eyewear before beginning this guide.
Ce dont vous avez besoin
-
-
-
Unplug and remove batteries to make sure the ring light does not turn on while repairing.
Demander à FixBot
-
-
-
Remove the two 2 mm screws on the side of the ring mirror (one on each side) using a Phillips #00 screwdriver.
-
-
-
Push the cover towards you and slide away from the rest of the mirror.
-
-
-
-
Using your hands, gently unscrew the old LED light bulb in a counter-clockwise direction.
-
-
-
Use your hands to screw in the new LED light bulb in a clockwise direction.
-
-
-
Screw in the two 2 mm screws on each side of the mirror using a Phillips #00 screwdriver.
-
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
York University, Team S1-G1, Woodhouse Winter 2021 Membre de l'équipe York University, Team S1-G1, Woodhouse Winter 2021
YORK-WOODHOUSE-W21S1G1
1 membre
12 tutoriels rédigés
1 commentaire de tutoriel
What to do to get over to release. I’ve taken the screws out but cannot get the cover to release.
