Aller au contenu principal

Cooler Master Laptop Fan Replacement

Ce dont vous avez besoin

  1. Cooler Master Laptop Fan Replacement, Fan: étape 1, image 1 de 1
    • Set your laptop cooler on the table and make sure it is not plugged into a laptop or powered on.

    • Never try to open the cooler while plugged in.

  2. Cooler Master Laptop Fan Replacement: étape 2, image 1 de 1
    • Flip the Device over and find ten folded metal slots holding the metal cover onto the base.

  3. Cooler Master Laptop Fan Replacement: étape 3, image 1 de 3 Cooler Master Laptop Fan Replacement: étape 3, image 2 de 3 Cooler Master Laptop Fan Replacement: étape 3, image 3 de 3
    • Bend each metal flap straight up with the pliers to allow the metal cover to slide off.

  4. Cooler Master Laptop Fan Replacement: étape 4, image 1 de 2 Cooler Master Laptop Fan Replacement: étape 4, image 2 de 2
    • Remove the cover and expose the inside of the Cooler.

  5. Cooler Master Laptop Fan Replacement: étape 5, image 1 de 2 Cooler Master Laptop Fan Replacement: étape 5, image 2 de 2
    • Unplug the power cable to the fan.

    • Make sure not to apply too much force and disconnect the wires to the device.

  6. Cooler Master Laptop Fan Replacement: étape 6, image 1 de 2 Cooler Master Laptop Fan Replacement: étape 6, image 2 de 2
    • On the bottom of the base locate the screw holes under the sticker on the base.

    • Unscrew the three fan screws.

  7. Cooler Master Laptop Fan Replacement: étape 7, image 1 de 1
    • Once all the pieces are taken apart, set aside the old fan and prep the new one for installation.

  8. Cooler Master Laptop Fan Replacement: étape 8, image 1 de 1
    • Apply a small amount of thermal compound to the base where the fan sets.

    • Make sure to apply thermal compound to keep the fan from overheating and damaging the base.

  9. Cooler Master Laptop Fan Replacement: étape 9, image 1 de 2 Cooler Master Laptop Fan Replacement: étape 9, image 2 de 2
    • Connect power cable for the fan and place the cables back in their slots.

  10. Cooler Master Laptop Fan Replacement: étape 10, image 1 de 2 Cooler Master Laptop Fan Replacement: étape 10, image 2 de 2
    • Screw fan back onto base.

  11. Cooler Master Laptop Fan Replacement: étape 11, image 1 de 1
    • Place cover back on base.

  12. Cooler Master Laptop Fan Replacement: étape 12, image 1 de 1
    • Fold all metal flaps back to hold cover on base.

  13. Cooler Master Laptop Fan Replacement: étape 13, image 1 de 1
    • Flip it over and it's finished.

Conclusion

Plug in the USB to insure proper working condition. And the cooling pad fan replacement is done.

2 autres ont terminé cette réparation.

Britton Williams

Membre depuis le 09/26/18

271 Réputation

1 tutoriel rédigé

2 commentaires

Hi there,

I’ve got a Targus Lap Chill Matt (Laptop Cooling Pad 15 - 17" Laptops) but the USB port had worn out and require a new replacement. Does anyone have any examples on how to replace the UBS port from a Laptop Cooler Pad?

Thanks!

rolly - Réponse

Hi,

Just wanted to say huge thanks to you for this guideline! I have a Cooler Master Notepal L1 and the fan kept making noises. But now it works totally fine after I was able to open the cover.

Thanks again!

//Parisa

Parisa - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 30

30 derniers jours : 87

Total : 5,512