Introduction

These procedures will instruct the reader how to remove and replace the camera.

After removing the back of the phone (not pictured), remove the battery by lifting up from the bottom with your thumb. There will be a groove that allows you to remove the battery with your thumb.
  • After removing the back of the phone (not pictured), remove the battery by lifting up from the bottom with your thumb. There will be a groove that allows you to remove the battery with your thumb.

Ajouter un commentaire

Remove the four screws (30 mm long) which hold the front and back half of the unit together using a Phillips #000 screwdriver. There will be one screw in each corner.
  • Remove the four screws (30 mm long) which hold the front and back half of the unit together using a Phillips #000 screwdriver. There will be one screw in each corner.

Ajouter un commentaire

  • Use a metal spudger to release all of the clips around the phone. These clips are used to hold the front and back panel on the phone together.

Ajouter un commentaire

  • After the clips are released, carefully separate the back housing from the phone. Notice the sticker that appears in the red box holds the phone together, but can be peeled apart.

Ajouter un commentaire

  • Carefully use the nylon spudger to pry the camera from its connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Cordell Miller

Membre depuis le 26/03/2018

235 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S1-G3, Harley Spring 2018 Membre de l'équipe IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 76