Réparez vos affaires Communauté Boutique

Corsair Void Pro RGB Speakers Replacement

Introduction

Replacing the speakers is a difficult task. It will required you to disassemble both sides of the headphones and require soldering skills. You will need to have a soldering kit to do this replacement. Replacing the speakers can be difficult without prior mechanical experience, so make sure you give yourself the necessary time to complete this replacement.

Ce dont vous avez besoin

  1. Corsair Void Pro RGB Speakers Replacement, Earcup: étape 1, image 1 de 1

    • Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

    Traduire

  2. Corsair Void Pro RGB Speakers Replacement: étape 2, image 1 de 2 Corsair Void Pro RGB Speakers Replacement: étape 2, image 2 de 2

    • Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.

    • If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

    Traduire

  4. Corsair Void Pro RGB Speakers Replacement: étape 3, image 1 de 2 Corsair Void Pro RGB Speakers Replacement: étape 3, image 2 de 2

    • Remove and set aside the black panel, taking care to keep the wires attached.

    • The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

    Traduire

  5. Corsair Void Pro RGB Speakers Replacement, Speakers: étape 4, image 1 de 1

    • Desolder the wire that connects to the speaker.

    • For steps on how to solder, see this helpful guide.

    Traduire

  6. Corsair Void Pro RGB Speakers Replacement: étape 5, image 1 de 2 Corsair Void Pro RGB Speakers Replacement: étape 5, image 2 de 2

    • Use a knife tool as a wedge to remove the speaker and glue in the new speaker.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Gianna Nobili

Membre depuis le 04/15/19

827 Réputation

5 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team S9-G13, Maness Spring 2019 Membre de l'équipe Cal Poly, Team S9-G13, Maness Spring 2019

CPSU-MANESS-S19S9G13

4 membres

14 tutoriels rédigés

5 commentaires

Where can i find a new speaker ?

brunodehulster - Réponse

The speaker listed in the parts, is not the correct speaker. I purchased them and they are NOT a fit.

ksmith - Réponse

Whats the size of the speaker?

smack2k - Réponse

The size of the speaker is 50 mm and about 10 mm in depth. I used this speaker in my own repair and it worked well.

noahoryan -

Can u show how to change “Charging Port”??

Jason HKB - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 13

30 derniers jours : 46

Total : 3,517