Craftsman Model 315.10721 Switch Replacement - Tutoriel de réparation iFixit

Introduction

The switch is an essential piece of the Craftsman Model 315.10721. Even if the motor and inner hardware is working, if the switch is broken, the saw will not start.

Ce dont vous avez besoin

Étape 1 Switch

Craftsman Model 315.10721 Switch Replacement, Switch: étape 1, image 1 de 1

Remove the two 1" Phillips screws using a #1 Phillips screwdriver.
Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.
Once the five screws are removed, lift the handle cover from the saw.

Étape 2

Craftsman Model 315.10721 Switch Replacement: étape 2, image 1 de 1

Using a Phillips #1 screwdriver, remove the 1/2" silver screw that is securing the switch.

Étape 3

Craftsman Model 315.10721 Switch Replacement: étape 3, image 1 de 1

Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.
The leads are where the black and white wires from the switch are plugged in.
Release both sets of the black and white wires and gently pull them from the leads.
To install the new switch, insert the wires of the new cord in the same way that they were removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Riley Hilliker

Membre depuis le 10/14/14

557 Réputation

5 tutoriels rédigés

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 4-47, Amido Fall 2014 Membre de l'équipe Cal Poly, Team 4-47, Amido Fall 2014

CPSU-AMIDO-F14S4G47

4 membres

5 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 1,298