Aller au contenu principal

Craftsman Model 315.10721 Table Guard Replacement

Ce dont vous avez besoin

  1. Craftsman Model 315.10721 Table Guard Replacement, Table Guard: étape 1, image 1 de 1
    • Using a flathead screwdriver, remove the 1/2" flathead screw to allow the table guard to pivot.

  2. Craftsman Model 315.10721 Table Guard Replacement: étape 2, image 1 de 1
    • Pivot the table guard from its upright position to an angle.

    • Using a Phillips #1 screwdriver, remove the 1" Phillips screw and the nut on the opposite side.

  3. Craftsman Model 315.10721 Table Guard Replacement: étape 3, image 1 de 1
    • Using the Phillips #1 screwdriver, remove eight 1" Philips screws from the main case.

    • Carefully remove the main case to expose the inside of the saw.

  4. Craftsman Model 315.10721 Table Guard Replacement: étape 4, image 1 de 1
    • Remove the old table guard by gently lifting it away from the main case.

    • Replace the old table guard with the new one by placing it in the same orientation as the one removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Riley Hilliker

Membre depuis le 10/14/14

557 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 4-47, Amido Fall 2014 Membre de l'équipe Cal Poly, Team 4-47, Amido Fall 2014

CPSU-AMIDO-F14S4G47

4 membres

5 tutoriels rédigés

2 commentaires

Where can I get a replacement table guard???

Roger Coyle - Réponse

Where can I get a replacement table guard for this jig saw????????

Roger Coyle - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 593