Réparez vos affaires Communauté Boutique

Crain Jamb Saw 775 2014 Power Cord Replacement

Introduction

This guide demonstrates how to replace the power cord on your Crain 775 Jamb Saw.

Ce dont vous avez besoin

  1. Crain Jamb Saw 775 2014 Power Cord Replacement, Unfasten the saw housing: étape 1, image 1 de 1

    • Unplug the power cord before you begin.

    • Use a Phillips #2 screwdriver to remove the eight screws securing the saw housing:

    • Four 20 mm screws

    • Two 50 mm screws

    • Two 55 mm screws

    Modifier

  2. Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the housing bracket: étape 2, image 1 de 1

    • Remove the metal housing bracket.

    Modifier

  3. Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the saw housing: étape 3, image 1 de 2 Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the saw housing: étape 3, image 2 de 2

    • Remove the saw housing.

    Modifier

  5. Crain Jamb Saw 775 2014 Power Cord Replacement, Unfasten the power cord: étape 4, image 1 de 1

    • Use a Phillips #2 screwdriver to remove the two screws securing the power cord grommet retention bracket.

    Modifier

  6. Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the retention bracket: étape 5, image 1 de 1

    • Remove the power cord grommet retention bracket.

    Modifier

  7. Crain Jamb Saw 775 2014 Power Cord Replacement, Disconnect the power cord wires: étape 6, image 1 de 3 Crain Jamb Saw 775 2014 Power Cord Replacement, Disconnect the power cord wires: étape 6, image 2 de 3 Crain Jamb Saw 775 2014 Power Cord Replacement, Disconnect the power cord wires: étape 6, image 3 de 3

    • Use a Phillips #2 screwdriver to loosen the two screw terminals securing the power cord wires to the main switch.

    • Remove the power cord wires from the main switch.

    • Take note of which lead connects to which terminal for reassembly purposes.

    • During reassembly, if the replacement power cord is not pre-fitted with crimped wire ends, ensure about a 1/2" of insulation is stripped from the end of the wires. Twist the wire strands before inserting them into the terminals.

    Modifier

  8. Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the power cord: étape 7, image 1 de 1

    • Remove the power cord and power cord grommet from the rest of the saw body.

    Modifier

  9. Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the power cord grommet: étape 8, image 1 de 3 Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the power cord grommet: étape 8, image 2 de 3 Crain Jamb Saw 775 2014 Power Cord Replacement, Remove the power cord grommet: étape 8, image 3 de 3

    • Slide the power cord out of the power cord grommet.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Tarun Thiruma

Membre depuis le 11/20/19

35 843 Réputation

134 tutoriels rédigés

Badges: 32

+ 29 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 115