Aller au contenu principal

Introduction

Use this guide to replace a dead battery.

Pièces

Aucune pièce spécifiée.

  1. Push the black button and slide the battery casing to the left simultaneously, until the battery is completely separated from the device. Push the black button and slide the battery casing to the left simultaneously, until the battery is completely separated from the device. Push the black button and slide the battery casing to the left simultaneously, until the battery is completely separated from the device.
    • Push the black button and slide the battery casing to the left simultaneously, until the battery is completely separated from the device.

  2. Remove the three exposed screws (4 mm) using a #0 Phillips. Peel off the the sticker that says "Creative Warranty Void if broken" and remove the screw (4 mm) beneath with a #0 Phillips.
    • Remove the three exposed screws (4 mm) using a #0 Phillips.

    • Peel off the the sticker that says "Creative Warranty Void if broken" and remove the screw (4 mm) beneath with a #0 Phillips.

  3. Remove the battery from the casing by bending the sides. The battery should pop out.  Be careful not to snap the case. Remove the battery from the casing by bending the sides. The battery should pop out.  Be careful not to snap the case. Remove the battery from the casing by bending the sides. The battery should pop out.  Be careful not to snap the case.
    • Remove the battery from the casing by bending the sides. The battery should pop out. Be careful not to snap the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Tim Wilson

Membre depuis le 11/04/2013

128 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 17-2, Regan Spring 2013 Membre de l'équipe Cal Poly, Team 17-2, Regan Spring 2013

CPSU-REGAN-S13S17G2

4 membres

8 tutoriels rédigés

3 commentaires

Where can I buy the battery, does not seem to be available on ebay or amazon

Mafaz - Réponse

where can i buy this exact battery. Can't find it with 6 tabs, only 4.

Bernie - Réponse

Can’t find a replacement battery nor the amp hours or wattage etc.. I’d even be ok with building a new housing to hold a larger battery, but I need the specs… I’ve got a vaccum table and can make a larger case to hold the battery.. But dang I’ve got to know how much power to provide to the unit and at how fast!

Matt Wyckoff - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 5

30 derniers jours : 42

Total : 4,420