Introduction

If the metal hinge that props open the lid of the record player is damaged or broken, this will guide you through the process of removing and replacing the metal hinge.

Open the lid and find the door hinge.
  • Open the lid and find the door hinge.

Ajouter un commentaire

Remove the two 12 mm screws that attach the hinge to the box.
  • Remove the two 12 mm screws that attach the hinge to the box.

Ajouter un commentaire

  • Remove the 2 screws that attach the hinge to the top of the box.

  • When reassembling, it is easier to attach the top screws first and then the bottom screws.

  • The picture displayed is from disassembly and is only used to show the location of the bottom screws. The top screws should be attached first.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jason

Membre depuis le 26/01/2014

103 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 1-38, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 1-38, Maness Winter 2014

CPSU-MANESS-W14S1G38

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 17

Total : 1,330