Cuisinart DCC-1100 Hot Plate Replacement

Introduction

This guide will help you replace the hot plate of the Cuisinart DCC-1100. Please have a replacement hot plate ready for the installation and unplug the machine before beginning work.

Ce dont vous avez besoin

Étape 2

Remove the coffee pot and place the coffee maker upside down.

Modifier

Étape 3

Remove the five 1.6mm Phillips #1 screws from the bottom panel.

Modifier

Étape 5

Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.

Modifier

Étape 6

Remove the retaining bracket and allow it to hang off of the heating element.

Modifier

Étape 7

Remove the hot plate from the heating element.
New thermal paste should be applied at time of installation.

Modifier

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Josh Harvey

Membre depuis le 01/25/18

910 Réputation

4 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

USF Tampa, Team S20-G4, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S20-G4, Passmore Spring 2018

USFT-PASSMORE-S18S20G4

4 membres

20 tutoriels rédigés

13Commentaires sur le guide

thank you for this informative display.

I have broken many expensive glass carafs for my cuisinart coffeemaker and finally purchased a cuisinart thermal caraf.

I do not need the hotplate to heat, so what do I do to stop the heating process?

I imagine I would need to remove one of the attached lines to the heating element, yes?

Thanks.

Luciano

luciano1213@msn.com

Luciano Muzzatti - 20 déc. 2018 Réponse

Hi, Thanks for sharing this information. I have an older Krups coffee maker that still works great but the hot plate is warn. I cannot seem to find a replacement plate for any Krups coffee maker models. Any suggestions? Thanks!

Paulette Paglia - 26 févr. 2019 Réponse

Josh

where do I buy the replacement hot plate?? I have the sis 15 coffeemaker and I have googled all over the place?? Thank u

linkev428 - 2 nov. 2019 Réponse

Yes, where do you buy the part??

Kathy Johnston - 18 janv. 2020 Réponse

Yes my question is where do you get the new hot plate? Any direction appreciated.

DougB - 28 mars 2020 Réponse

I replaced hot plate with a stainless steel disk bought on Amazon 1/8” thick and 4 1/2” diameter $5 plus shipping. Works a charm.

Peter - 19 sept. 2020 Réponse

Thanks--great tip! Did you use thermal paste? What is it--the heat sink compound used in PCs, or something else? Thanks!

Jan Pendleton - 14 avr. 2022