Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the coffee pot and place the coffee maker upside down.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five 1.6mm Phillips #1 screws from the bottom panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the retaining bracket and allow it to hang off of the heating element.
-
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.
13 commentaires
thank you for this informative display.
I have broken many expensive glass carafs for my cuisinart coffeemaker and finally purchased a cuisinart thermal caraf.
I do not need the hotplate to heat, so what do I do to stop the heating process?
I imagine I would need to remove one of the attached lines to the heating element, yes?
Thanks.
Luciano
luciano1213@msn.com
Hi, Thanks for sharing this information. I have an older Krups coffee maker that still works great but the hot plate is warn. I cannot seem to find a replacement plate for any Krups coffee maker models. Any suggestions? Thanks!
Yes, where do you buy the part??