Introduction
This guide will help you replace the selection knob of the Cuisinart DCC-1100. Please have a replacement knob ready and unplug the machine before beginning work.
Ce dont vous avez besoin
-
-
-
Open the lid.
-
Remove the two 1.6mm Phillips #1 screws from the lid.
-
-
-
-
Push the display into the maker so that way you can access the screws in the back.
-
Remove the four 1mm Phillips #0 screws from the back.
-
Demander à FixBot
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
USF Tampa, Team S20-G4, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S20-G4, Passmore Spring 2018
USFT-PASSMORE-S18S20G4
4 membres
84 tutoriels rédigés
