Réparez vos affaires Communauté Boutique

Cuisinart DCC-1200 Coffee Carafe Handle Replacement

Introduction

Is the handle on the carafe of your Cuisinart coffee maker lose or damaged? If so, this guide will provide instructions on how to replace the handle on the carafe. To complete this task all you will need is a bit driver with the PH1 Phillips bit.

Ce dont vous avez besoin

  1. Cuisinart DCC-1200 Coffee Carafe Handle Replacement, Coffee Carafe Handle: étape 1, image 1 de 3 Cuisinart DCC-1200 Coffee Carafe Handle Replacement, Coffee Carafe Handle: étape 1, image 2 de 3 Cuisinart DCC-1200 Coffee Carafe Handle Replacement, Coffee Carafe Handle: étape 1, image 3 de 3

    • Wedge the metal spudger between the plug and the handle.

    • Carefully pry the plug with the metal spudger by applying pressure around the plug.

    • Too much pressure and prying can damage the plug.

    Modifier

  2. Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 2, image 1 de 2 Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 2, image 2 de 2

    • Use the bit driver with the Phillips PH1 bit to remove the 27 millimeter long screw in the base of the handle.

    Modifier

  4. Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 3, image 1 de 1

    • Lift up on and remove the lid from the carafe.

    Modifier

  5. Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 4, image 1 de 2 Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 4, image 2 de 2

    • Position the metal spudger underneath the top cap of the handle.

    • Gently pry up to extract the upper assembly cap.

    • Pry carefully to prevent from causing aesthetic damage to upper assembly cap.

    Modifier

    The contrast is poor here, but now that I have the cap off, I know that no spudger I have would fit there anyway. Instead I inserted a metal kebab skewer (shut up, I was in the kitchen ;) ) in the bottom of the handle, ring/handle first, and used that to push outwards/upwards on the top cap. That raised it up a bit and gave me a gap in which I could fit a spudger to pry it off.

    Max - Réponse

  6. Cuisinart DCC-1200 Coffee Carafe Handle Replacement: étape 5, image 1 de 1

    • Use the bit driver with the Phillips PH1 to remove the 5 millimeter screw in upper assembly of handle.

    • Remove handle by lifting straight up.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Austin Wheaton

Membre depuis le 02/15/18

879 Réputation

4 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

UW Stout, Team S8-G1, Ogden Spring 2018 Membre de l'équipe UW Stout, Team S8-G1, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G1

4 membres

15 tutoriels rédigés

Un commentaire

I needed this guide after my spouse put the carafe in the dishwasher and the handle sloshed no matter how much I shook it. It turns out water is easily trapped under the top cap; even though there's a drain hole into the handle, it doesn't seem to want to drain. I've wiped it off and left it to dry completely before reassembling it.

Max - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 64

Total : 4,140