Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will allow you to get to the most basic components of the device where you will be able to perform many necessary replacements.
Ce dont vous avez besoin
-
-
Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.
-
Move the circuit board to the side so it is out of the way.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.