Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove cooking plates by pushing in the tabs on each side of the plate at the same time.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 5.5 mm Phillips #2 screw next to center black button.
-
After removing the center screw the metal plate should be free to remove.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.
-
Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
-
The aligned parts will allow the cooking surfaces to work properly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.
-
Move the circuit board to the side so it is out of the way.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 6 mm Phillips #2 screws that secure the white plastic LED holder.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Cut the zip ties which hold the LED lights in place with scissors/knife.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide back black plastic covers and cut the two wires connected to the LED with a pair of scissors.
-
The LED bulb should now be free to remove. In order to replace bulb you must solder the new LED into the existing wires.
-
Upon soldering the LED will need to be zip tied back in place.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
Équipe
Cal Poly, Team 1-12, Maness Spring 2016 Membre de l'équipe Cal Poly, Team 1-12, Maness Spring 2016
CPSU-MANESS-S16S1G12
4 membres
6 tutoriels rédigés
4 commentaires
Hai
is there any body can come home and help me
or any place I can send my machine and repair
regds
Leela Manilal
any tips on how to fix a broken thermostat?
Will any green LED work? Or does it have to be a particular voltage?
How do I get the heating element off? It seems pretty securely connected via the red and white wires connected to the machine. Is there an easy way to disassemble this part? I honestly just want to clean the baked on grease on the pans but I’ve got to remove the heating element in order to do that. Any advice would be most appreciated. Thanks!
