Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove cooking plates by pushing in the tabs on each side of the plate at the same time.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 5.5 mm Phillips #2 screw next to center black button.
-
After removing the center screw the metal plate should be free to remove.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.
-
Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
-
The aligned parts will allow the cooking surfaces to work properly.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.