Introduction

The LED backlight may burn out, causing the backlight to cease working properly. This guide will demonstrate how to replace the LED backlight.

Pièces

Aucune pièce nécessaire.

Be sure to unplug the keyboard before starting the disassembly.
  • Be sure to unplug the keyboard before starting the disassembly.

  • Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

Ajouter un commentaire

Remove the sixteen 5 mm length screws using the Phillips head #2.
  • Remove the sixteen 5 mm length screws using the Phillips head #2.

  • One of the screws may be located underneath a manufacturer's sticker.

Ajouter un commentaire

  • Lift up and remove the plastic casing.

Ajouter un commentaire

  • Remove the metal backing located directly underneath the white plastic casing.

Ajouter un commentaire

  • Be careful not to pull too hard on the ribbon cable, as it may break.

  • Disconnect the ribbon cable that connects the LED board to the motherboard.

Ajouter un commentaire

  • Carefully remove the LED board, which should now come free from the casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Braydon Lantz

Membre depuis le 12/02/2018

193 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S15-G2, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S15-G2, Boczar Spring 2018

USFT-BOCZAR-S18S15G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 54