Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Place the CygoLite on a flat surface with the bottom side facing up. Locate the four screws on the bottom of the device. Unscrew them with a Phillips head screwdriver and remove the bottom casing.
    • Place the CygoLite on a flat surface with the bottom side facing up.

    • Locate the four screws on the bottom of the device.

    • Unscrew them with a Phillips head screwdriver and remove the bottom casing.

  2. Locate the rubber gasket on the side of the device. Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.
    • Locate the rubber gasket on the side of the device.

    • Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.

    • Be sure to line up the grooves in the casing with the grooves on the rubber gasket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Trent Vigar

Membre depuis le 22/10/2012

101 Réputation

1 tutoriel rédigé

Équipe

Clemson, Team 14-3, Benson Fall 2012 Membre de l'équipe Clemson, Team 14-3, Benson Fall 2012

CLEM-BENSON-F12S14G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 242