Aller au contenu principal

D-Link DCS-2630L Wi-Fi Camera Microphone Replacement

Ce dont vous avez besoin

  1. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement, Back casing: étape 1, image 1 de 1
    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 2, image 1 de 1
    • Remove the back casing to expose the circuit board.

  3. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 3, image 1 de 1
    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 4, image 1 de 1
    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

  5. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement, Microphone: étape 5, image 1 de 1
    • Remove the two 4.35 mm screws on the circuit board using the Philips head PH00 screw driver.

  6. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 6, image 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 6, image 2 de 2
    • Detach the white plug by gently pulling on the black wires.

  7. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 7, image 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 7, image 2 de 2
    • Remove the circuit board to expose the camera body.

    • At the same time, you will need to feed the wires through the circuit board and out the slot in the black plate under the circuit board.

  8. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 8, image 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 8, image 2 de 2
    • Gently pull on the grey wire to detach the microphone from the camera body.

  9. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 9, image 1 de 3 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 9, image 2 de 3 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: étape 9, image 3 de 3
    • Detach the microphone from the circuit board by gently pulling on the grey wire.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Équipe

IUPUI, Team S4-G2, Baechle Spring 2018 Membre de l'équipe IUPUI, Team S4-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G2

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 356