Aller au contenu principal

D-Link DCS-5222L Lens Replacement

Ce dont vous avez besoin

  1. D-Link DCS-5222L Lens Replacement, Lens: étape 1, image 1 de 3 D-Link DCS-5222L Lens Replacement, Lens: étape 1, image 2 de 3 D-Link DCS-5222L Lens Replacement, Lens: étape 1, image 3 de 3
    • Remove the four rubber feet with tweezers to access the screws.

    • Remove all four 7mm screws by using a #1 Phillips screwdriver.

    • Then, with your hands, pull off the lower part of the camera body.

  2. D-Link DCS-5222L Lens Replacement: étape 2, image 1 de 3 D-Link DCS-5222L Lens Replacement: étape 2, image 2 de 3 D-Link DCS-5222L Lens Replacement: étape 2, image 3 de 3
    • On the base motherboard, there are five connecting cables. Disconnect all of them from the motherboard gently using safety tweezers.

    • Do not cut or damage the cables.

    • Disconnecting the antenna cable from motherboard is not necessary.

  3. D-Link DCS-5222L Lens Replacement: étape 3, image 1 de 3 D-Link DCS-5222L Lens Replacement: étape 3, image 2 de 3 D-Link DCS-5222L Lens Replacement: étape 3, image 3 de 3
    • Remove the two 7mm screws holding the motor using a #1 Phillips screwdriver.

    • Pull off the motor and lift away the midbody of the camera using your hands.

  4. D-Link DCS-5222L Lens Replacement: étape 4, image 1 de 2 D-Link DCS-5222L Lens Replacement: étape 4, image 2 de 2
    • Separate the black camera shroud from the upper body by prying loose the tabs with a plastic opening tool or spudger.

    • Use your hands to wiggle the shroud free.

  5. D-Link DCS-5222L Lens Replacement: étape 5, image 1 de 3 D-Link DCS-5222L Lens Replacement: étape 5, image 2 de 3 D-Link DCS-5222L Lens Replacement: étape 5, image 3 de 3
    • Use a #1 Phillips screwdriver to unscrew the four 5mm screws on both sides of the black camera housing to separate it from white body.

    • Unscrew the two 7mm #1 Phillips screws on both sides of the camera housing to open it.

  6. D-Link DCS-5222L Lens Replacement: étape 6, image 1 de 3 D-Link DCS-5222L Lens Replacement: étape 6, image 2 de 3 D-Link DCS-5222L Lens Replacement: étape 6, image 3 de 3
    • Gently disconnect the three cables from the small motherboard using safety tweezers.

    • Use a #0 Phillips screwdriver to remove the two black 2mm screws and a #1 Phillips screwdriver to remove the 2 silver 6mm screws.

    • Separate the board from the black housing.

  7. D-Link DCS-5222L Lens Replacement: étape 7, image 1 de 3 D-Link DCS-5222L Lens Replacement: étape 7, image 2 de 3 D-Link DCS-5222L Lens Replacement: étape 7, image 3 de 3
    • Using your fingers, remove the focus adjustment ring.

    • Twist the lens to unscrew it from the camera module.

    • Replace the broken lens with new one and reassemble all parts of the camera respectively.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Atefeh Rahmani

Membre depuis le 10/27/18

172 Réputation

1 tutoriel rédigé

Équipe

UMass Dartmouth, Team S2-G5, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S2-G5, Peak Fall 2018

UMASSD-PEAK-F18S2G5

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 920